Switches

Selco - Irrigation Bi-Metal Thermal High Limit Switch 120°F 3/8″ x 1/2″

Selco Probe CPO/CPC Series thermostats are thermally sensitive bi-metallic switches which, when reaching a set point, will either open or close to make or break an electrical circuit. One piece construction made from brass that can be...

MTM Hydro - Vacuum Switch

MTM Hydro's European Vacuum Switches are used in a variety of methods to turn other items in a pressure washing system on or off. Typically, this switch is used for burner control and is activated by a low pressure vacuum threshold near the pump inlet...

AR North America - PS6038 3/8″ Pressure Switch - 363 PSI Activation

The flow switch can indicate to the pump to shut off or to turn on. Some of the general uses are for pump protection, for cooling-circuit protection and alarms for too high or too low flow rates. 4060 Max PSI 167° F Max Temp 250 V 16 Amps 45″...

General Pump - 100975 Reedless Brass Flow Switch -12 GPM

The General Pump 100975 Reedless Flow Switch is a Brass made TMT Inline Flow Switch with 5 Amp Microswitch, 48″ 18 AWG Lead & No Spring. It uses magnets for all movements and has a minimum flow activation of 1.0 GPM. Min. GPM : 1 Max. GPM :...

AR North America - MV60V Vertical Mounting 4,350 PSI Flow Switch

The flow switch can indicate to the pump to shut off or to turn on. Some of the general uses are for pump protection, for cooling-circuit protection and alarms for too high or too low flow rates. Max PSI 5025 Inlet 3/8” F Outlet 3/8” F Max...

Suttner - ST-6 High Pressure Flow Switch

TRUSTY : The ST-6 Water-Activated Flow Switch mounts further downstream in the pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close. Its water-flow activated switch controls the...