Product Description
The Beckett GeniSys® 7556 Oil Burner Control is a sealed (ideal for high-moisture settings) 12 VDC primary safety control system for oil burners commonly found on pressure washers, road stripers, crack sealers, hot patchers, and asphalt distributors, among other applications. When paired with a compatible cad cell flame sensor, the GeniSys® 7556 effectively manages the oil burner motor, igniter, and optional solenoid valve. This control system can facilitate both interrupted and intermittent ignition duty cycles, with a lockout time of 15 seconds.
Product Features
- Programmable valve-on delay and motor-off delay provides chamber cooling after call for heat
- Valve-on delay / motor-off delay — field-programmable with Beckett GeniSys® Contractor Tool
- Epoxy potted for moisture resistance
- Welded relay protection with redundant motor relays
- High ambient temperature rating
- Alarm output enables visual or audio indication of flame failure and lock out condition
- Interrupted ignition
- Relight function
- Fused protection
- 15 second lockout time
- Communication port
Inputs
- Voltage: 12 VDC nominal (11 to 16 VDC)
- Current: 160 mA nominal (500 mA max at 16 VDC)
- Enable Load: 40mA at 12 VDC
Outputs
- Motor: 12 VDC, 20 full load amps (FLA), 100 locked rotor amps (LRA)
- Igniter: 12 VDC, 5 A
- Solenoid Valve: 12 VDC, 2 A
- Lockout Alarm: 12 VDC, 2 A
