All Electric – When Water and Electricity Make Sense

At American Pressure, one solution to you cleaning needs that we offer are All Electric Pressure Washers. But what exactly do we mean by 'All Electric'? Simply put, these pressure washers utilize electricity to both pump and heat the water, offering a powerful alternative to traditional fuel-based models. Our advanced technology heats water on demand to a remarkable 150°F-185°F (65°C – 85°C) through an efficient system that harnesses the principles of high-pressure pumping and heat exchange.

How Does It Work?

In all electric pressure washers, cold water enters the machine, gets pressurized, and then flows through a heat exchanger—commonly referred to as a coil or heat exchanging coil. The heat exchanging coils on an all electric pressure washer are different than the coils used on the oil fired or gas fired pressure washers where the open flame is used to heat the metal which transfers the heat to the cold water flowing inside the coil.

Types of All Electric Pressure Washers

There are primarily two types of electric pressure washers that heat water using electricity instead of fuel combustion:

1. Reverse Bath: Much like a conventional water heater, this system features heating elements submerged in the water. As the water is pumped through high-pressure tubing, it absorbs heat from the surrounding hot water.
2. Direct Submersion: This design places the heating elements directly within the high-pressure water, providing efficiency and reduced time for heating.

While reverse bath systems can produce high output temperatures for shorter durations by storing energy, they may need a warm-up time and can lose some energy to ambient air. However, they boast an average efficiency of about 90%. In contrast, direct submersion models approach nearly 100% efficiency, making them an excellent choice for those seeking outstanding performance.

At American Pressure, we proudly offer a variety of electric heated pressure washers from leading brands like Alkota, Landa, Epps, Karcher, MiTM, and AaLadin. Each brand comes with unique technologies and benefits tailored to your specific needs. Contact us today to discuss the best fit for your requirements!

Advantages of All Electric Pressure Washers

• User Efficiency: Experience near-instant hot water at the trigger gun—reaching full operating temperature in about 8 seconds compared to the 2-3 minutes for natural gas options. This not only enhances user convenience but also conserves water and time.
• No Venting Required: Easily connect your All Electric Pressure Washer to an incoming water supply and electricity. There’s no need for roof or wall penetrations, no make-up air to worry about, no flames, or additional gas lines, allowing for installation in locations where venting isn’t feasible.
• Exceptional Reliability: With minimal maintenance needs, all electric units eliminate concerns about soot, combustion gases, and pilot assemblies. Fewer parts mean increased reliability and reduced likelihood of malfunction.
• Reduced Noise Levels: Enjoy a quieter workspace with electric heat—no noisy flames or burners to disrupt your cleaning tasks.

Potential Drawbacks of Electric Heated Pressure Washers

• Temperature Drop Off: High flow rates may lead to cooler water compared to gas-fired alternatives.
• Limited Selection: Fewer pressure and flow combinations are available than in gas-fired models.

• Power Requirements: Depending on brand and temperature rise a 4 GPM All Electric Pressure washer will require between a 60 to 100 amp circuit in 480 Volt 3 phase and double that for 240 Volt. Generally, they are well suited for industrial buildings and locations.
• Operational Costs: All electric heat in a pressure washer is comparable to the cost of a pressure washer using diesel or kerosene to heat the water, but it is more expensive than natural gas.

At American Pressure, we are happy to analyze your operational expenses based on your specific electricity and natural gas rates. Our experts can help you assess your entire cleaning application and investment in pressure washers to enhance your bottom line. For more information, please call us at 763-521-4442 or email us at sales@americanpressureinc.com.

Key Points to Remember

• Some types of Electric Heated Pressure Washers achieve nearly 100% efficiency.
• Experience minimal delays in reaching hot water at the spray gun.
• No need for exhaust stacking with electric models.
• Requires substantial power: ideally 230 Volt 3-phase or 460 Volt 3-phase configurations.
• Offers a combustion-free cleaning alternative for wash bays and manufacturing facilities.
• All Electric Pressure Washers tend to occupy less space than their oil-fired or natural gas counterparts.
• Advanced features, including remote control, timers, and chemical injection, are available across various models.

American Pressure is here to assist you in selecting the right electric pressure washer for your needs, with domestic and international shipping options available. Let us help you take your cleaning to the next level!