Switches

PA - PR1 Stainless Steel Pressure Switch - 8700 PSI

Equipped with a ⅜″ M inlet compatible with all pressure washer brands, this pressure switch enables the burner system to ignite upon sensing high-pressure water flow. When the trigger gun is released, the burner automatically shuts down until the...

PA - PR16 Pressure Switch 580 Activation

PA PR16 / General Pump YPRESSWITCH is a Pressure Switch with a 4,050 PSI capacity, featuring a 580 PSI (Black) activation point and a 1/4" NPT-M stainless steel inlet. This electro-mechanical device operates by opening or closing an electrical control...

Tecomec - PS6 Pressure Switch 363 PSI Activation

Crafted to regulate the hot water system of your Pressure Washer, this device triggers at 363 PSI to enable water flow through the heating coil upon request for hot water. Once the demand subsides, the pressure switch shuts, routing water through the...

General Pump - 100879 TMT Inline Reedless Flow Switch

The Inline Flow Switch from General Pump features advanced micro-switch technology, eliminating the need for a reed switch. Designed to be mounted vertically in your tank, this switch activates with just .5 gpm flow and maintains minimal pressure drop up...

Landa - 405091 275º High Limit Control Switch

Normally used with another adjustable or fixed range thermostat which regulates water temperature. Operates as a safety device to shut off burners to prevent machine (water) overheating flashing to steam. AMP: 15 at 110V, AMP: 10 at 220V  1/2" MPT...

General Pump - TS38150 150º High Limit Control Switch

GP TS12150 High Limit TS Series Thermal Switch 1/2" NPT 150º F with 68" Wire Lead. Simple installation and can be mounted in any position. Factory calibrated. Made in the USA.  Specifications: • Maximum Pressure: 5,000 PSI• Voltage: 5...

General Pump - 100329 Flow Switch Phoenix w/ Pilot

The General Pump 100329 flow switch is a versatile component that excels in low volume, low pressure flow applications while enabling high pump output flow. It ensures dependable switching operations, activating with as little as 0.75 GPM flow and 18 PSI...

Suttner - ST-5 4380 PSI Vertical Mount Flow Switch

Facilitates a better pressure washing job by minimizing potential leaks by mounting further downstream within a pumping system compared to other switches. Reed switch design makes replacements a breeze and maintenance is made simple. Always depend on...

Selco - Irrigation Bi-Metal Thermal High Limit Switch 120°F 3/8″ x 1/2″

Selco Probe CPO/CPC Series thermostats are thermally sensitive bi-metallic switches which, when reaching a set point, will either open or close to make or break an electrical circuit. One piece construction made from brass that can be...

MTM Hydro - Vacuum Switch

MTM Hydro's European Vacuum Switches are used in a variety of methods to turn other items in a pressure washing system on or off. Typically, this switch is used for burner control and is activated by a low pressure vacuum threshold near the pump inlet...

AR North America - PS6038 3/8″ Pressure Switch - 363 PSI Activation

The flow switch can indicate to the pump to shut off or to turn on. Some of the general uses are for pump protection, for cooling-circuit protection and alarms for too high or too low flow rates. 4060 Max PSI 167° F Max Temp 250 V 16 Amps 45″...

General Pump - 100975 Reedless Brass Flow Switch -12 GPM

The General Pump 100975 Reedless Flow Switch is a Brass made TMT Inline Flow Switch with 5 Amp Microswitch, 48″ 18 AWG Lead & No Spring. It uses magnets for all movements and has a minimum flow activation of 1.0 GPM. Min. GPM : 1 Max. GPM :...