Custom Power Plants, Built for Your Job
Posted by American Pressure Inc on 17th Nov 2026
Some cleaning jobs don't fit the catalog. Every operation has its own needs, and sometimes the setup you're looking for isn't something you can find online or buy off a shelf. When a standard machine won't do the job, a custom power plant can.
At American Pressure, we design, build, install, and test custom pressure washing power plants around each customer's job. We build machines for the work in front of you.
How It Works
Every custom build starts with questions. We want to know what you're cleaning, how often you clean it, and where the job slows you down. Then we plan out a machine that fits your job.
Once the plan is set, our own techs pick the parts and put the machine together. We handle the install and plumbing too, so you're not stuck figuring it out yourself. Before we call it done, we run every machine on-site to make sure it works.
Why Go Custom With American Pressure
Our machines are built to fit the job. We don't build anything different than what you need, we don't try to sell you a bigger machine, and we don't cut corners. Prices change from job to job, but the quality of the build and the parts we use don't.
We also build machines to last, not just to run well on day one. Our goal on every install is 100% uptime. And when the machine handles the washing, your crew can get out to other job sites.
Our team has years of hands-on experience on all kinds of jobs, and American Pressure has been doing this since 1975.
Case Study: Dyne Fire Protection Labs
Dyne Fire Protection Labs, an NFPA Global Solutions company, is an independent lab that tests fire sprinklers, firefighting foams, antifreeze solutions, and dry chemical agents. Every sprinkler nozzle has to be tested one at a time, and Dyne couldn't find a machine on the market that could do it.
After talking through what they needed, we designed and built a custom nozzle-testing station for them. It included a pump and motor, all the plumbing, a wall manifold, and flow controls. We installed it, tested it on-site, and Dyne was happy with how it turned out.
Case Study: Milk Company
We worked with a milk company on a tray and dolly washing system. The trays carry 1-gallon milk jugs and stack on top of each other, and the dollies move the trays. Both came back from deliveries with spilled and dried milk on them. The company had already bought a conveyor cleaning system, but it was basically a low-pressure rinse. They needed more pressure and more heat, and the trays have a lot of nooks and crannies that need to be cleaned.
To get everything clean in a single pass, we developed a rotating spray bar with rotating nozzles on it. For testing, we combined two Landa MHC hot water pressure washers to get the flow and heat we needed. The test proved the setup could clean the front and back of the trays. The dollies were simpler to clean, since they have a flat surface and only one side needs washing.
For the final system, the company went with four Cat pump platforms for the trays and one for the dollies. Each pump powers its own rotating spray bar with two rotating nozzles. There is a tank under the conveyor system to catch and reuse the water through a filtration system. We added an on demand water heater to get the needed heat to optimize the cleaning efficiency as the carts and dollies move through the conveyor system.
Start a Consultation
Got a job that a standard pressure washer can't handle? Let's talk through it.
Call us at 763-521-4442, email info@americanpressureinc.com, or request a consultation on our Custom Power Plants page.
American Pressure Inc. | Robbinsdale, MN | Since 1975