Choosing the Right Hydro Excavating Nozzle for the Job
Posted by American Pressure Inc on 18th Nov 2026
Potholing, daylighting, trenching and post holes are all hydro excavation work, but they don't all call for the same nozzle. The good news is you don't have to choose which one to buy. Our new Hydro Excavating Nozzle 4-Pack puts the Dig Pig Silencer, Hydra-Flex Ripsaw, Suttner ST-458 and Centurion HX in one box, so you have all four on hand for every job.
The Hydro Excavating Nozzle 4-Pack comes in sizes 4.0, 6.0, 8.0, 10.0 and 12.0. It's in stock now Shop the 4-Pack here.
From left to right: Dig Pig Silencer, Hydra-Flex Ripsaw, Suttner ST-458 and Centurion HX.
Have all four ready in your truck
Having all four on the truck means your crew always has the right tool for the right job. Instead of forcing one nozzle to do everything, your operators can grab the one that fits the ground and the work in front of them. That saves them time and water, keeps every job running efficiently and makes you more money. The 4-Pack puts all four in one box.
Four nozzles, four spray angles
The clearest difference between the four is the spray angle. The Silencer has the tightest pattern at 10°, the Ripsaw sits at 18°, the ST-458 at 20°, and the Centurion HX has the widest at 22°. Between all the nozzles, the kit will cover the hydro excavating job you run into.
Dig Pig Silencer: compact soil and deeper cuts

The Dig Pig Silencer is the nozzle in the kit for compact soils and deeper cuts. Its 10° spray angle is the tightest of the four, which gives you more precision and control, and the focused spray lets it cut deeper. It's built for potholing, trenching and post holes, and it's a top performer in frozen conditions and challenging ground types.
The Silencer gets its name from its remarkably quiet rotation, which lets operators focus on more important job site sounds, and its design keeps vibration very low to cut down on hand discomfort. It's rated for 4200 PSI and 205°F, and it's lab tested to 6600 PSI.
The body and inlet are 303 stainless steel, the rotor is strengthened aluminum and stainless steel, and the carbides and seats are tungsten carbide. A filter coin system adds protection for the internals, and the cover is non-conductive Hi-Vis yellow. When it's time for a rebuild, the Silencer Refresh Kit includes all O-rings, the seat and the full rotor system.
Hydra-Flex Ripsaw: potholing, daylighting, trenching and post holes

The Hydra-Flex Ripsaw is the tried-and-true, everyday nozzle in the kit. It covers all four jobs (potholing, daylighting, trenching and post holes) and cuts through most soil types well. Its 0° stream rotates at an optimal speed into an 18° cone, a pattern that's ideally suited for potholing. It runs from 1000 to 3200 PSI and handles water up to 180°F.
The kit includes the Ripsaw HD, whose heavy duty coating is a special formulation made for frost, shale and other rocky conditions. The housing is stainless steel with tungsten carbide wear surfaces, and the body has a non-conductive urethane cover.
Great Lakes Heating and Air gave the Ripsaw a 5-star review, saying their crew loves how fast it eats through the ground. When it wears, the Ripsaw Rebuild Kit includes the inlet screen, rotor assembly, insert, rubber boot and seat retainer, and the product page has a video showing how to rebuild it.
Suttner ST-458: potholing and daylighting

The Suttner ST-458 is the price-conscious option in the kit, built for potholing and daylighting in most soil types. Its 20° spray angle is wide enough to help move more debris. It has a brass and ceramic build and is rated to 6,000 PSI, the highest of the four, with a maximum temperature of 190°F.
The ST-458's cover does a lot of the work. Its molded, wear-resistant poly cover protects the nozzle, helps keep debris from damaging the internals and significantly increases the nozzle's lifetime, and an added extension on the outlet helps keep mud and dirt away from the seat and rotor. Repair kits for the ST-458 are available from American Pressure.
Centurion HX: the widest spray angle, every job

The Centurion HX has the widest spray angle in the kit at 22° and covers all four jobs: potholing, daylighting, trenching and post holes. That 22° cone, paired with slowed rotation, helps it cut through the surface fast and move debris to the boom hose. It works in most soil types, and its 212°F rating is the highest of the four, which makes it great for frost in the winter.
Traditional turbo nozzles rotate at high, uncontrolled speeds. The Centurion HX uses a controlled-RPM rotor instead, which keeps the water stream consistent and concentrated over longer distances. Flow-straightening technology reduces turbulence inside the nozzle so the water exits in a more cohesive stream. It's built to simplify the removal of compacted soil, clay, debris and frozen ground.
The tungsten carbide rotor resists abrasion, particularly when you're running recycled or silty water, and the housing is stainless steel. An anti-static, replaceable jacket protects the outside from wear, and the nozzle is manufactured in Italy. It's rated to 3,600 PSI and designed to be fully repairable, so the rotor and seats can be replaced instead of the whole nozzle.
Which nozzle for which job?
All four nozzles in the kit are built for potholing, so on a potholing job the ground you're working in decides which one comes off the truck. For daylighting, reach for the Ripsaw, ST-458 or Centurion HX. Trenching and post holes are covered by the Silencer, Ripsaw and Centurion HX.
Which nozzle for which soil?
When the soil is compact or the job calls for a deeper cut, the Silencer is the kit's nozzle for it. For most other soil types, the Ripsaw, ST-458 and Centurion HX all do the work, and the Centurion HX is also built to simplify removing compacted soil and clay.
Frozen ground has three options in the kit. The Silencer is a top performer in frozen conditions, the Ripsaw's heavy duty coating is made for frost, shale and rocky conditions, and the Centurion HX is built for frozen ground too. If your crew runs recycled or silty water, the Centurion HX's tungsten carbide rotor is made to resist that abrasion.
(gravel and sand recommendations? Could work in right here)
Debris movement
Each nozzle moves debris to the boom hose a little differently. The Silencer's narrow 10° cone gives a focused spray that cuts deeper but moves less debris. The Ripsaw moves more debris than the Silencer, and the ST-458's wider 20° cone helps it move more debris as well. The Centurion HX pairs its 22° cone with slowed rotation to cut through the surface fast and move debris to the boom hose. 
Ready to put all four on your truck? With the Hydro Excavating Nozzle 4-Pack, you'll have the right nozzle for every job, plus spares on hand if one wears out mid-job. Get yours for $1,299 in sizes 4.0 through 12.0.
See our full hydro excavation lineup, or call us at 763-521-4442, Monday to Friday from 7:30am to 5pm, or email info@americanpressureinc.com.